Price: Call for Pricing

    Quantity:


    T30x2 Dexter 30 lb Stacked Dryer

    The T-30x2 is Dexter's mid-sized stacked dryer. Available in reversing and non reversing.  Reversing only available in 208-240 V.  Non reversing models will work on 120 V or 208-240 V with some wiring changes.  Like all Dexter dryers, it is available with stainless steel or white front panels. 

    We usually recommend that our customers buy mostly 50 lb stack dryers with a few 30 lb stack dryers for customers with small loads.

    Specifications

    Capacity
    Dry Weight Capacity - 2 x 30 lb
    Cylinder Volume (per tumbler) - 11.3 cu ft

    Speed
    Tumbler Speed - 47 RPM
    Motor Size (per tumbler) - 1/2 hp

    Airflow (per tumbler)
    600 CFM

    Dimensions
    Cabinet Height - 76 1/4"
    Cabinet Width - 31 1/2"
    Cabinet Depth - 49 1/2"
    Door Opening - 22 5/8"
    Floor to Lower Door Bottom - 7 5/8"
    Floor to Upper Door Bottom - 45 1/4"
    Cylinder Diameter - 30"
    Cylinder Depth - 27 1/2"
    Lint Screen Area (per tumbler) - 453 sq in

    Weight

    Net Weight - 719 lb

    Shipping Information
    Shipping Weight - 765 lb
    Shipping Height - 81 1/4"
    Shipping Width - 33"
    Shipping Depth - 53 3/4"

    Gas Requirements
    Gas Supply Connection - 1/2"
    Natural Gas Supply (Water Column) - 5-8"
    LP Gas Supply (Water Column) - 11 1/2 - 13 1/2"
    Gas Usage  - 90,000 BTU/hr per tumbler

    Electrical Requirements
    Per stack dryer:
    Volts / Phase / Wiring / Circuit Breaker Amps / Running Amps / Wire Size
    208-240 / 1 / 2 wire + ground / 15 / 5 / #12
    120 / 1 / 2 wire + ground / 20 / 8 / #12

    Installation Recommendations
    Minimum Clearance Between Machines - 0"
    Minimum Clearance Behind Machines - 18"
    Make-Up Air Required (per stack dryer) - 1.5 sq ft
    Exhaust Size - 8"
    Max. Exhaust Back Pressure (Water Column) - 0.3"
    Recommended Exhaust Length - 14' and 2 elbows

    Full Product/Spec Sheet